http://www.aboutsolarlights.com/diy-solar-light-tubes/
Thanks for visiting our site about Solar Lights ! We hope you will find clear information about Diy Solar Light Tubes. Feel free to browse our website. When you do not find the information immediately, you can also use the search feature on our site. We provide you with articles, pictures, youtube movies, .... . Push the contact button when you have a question.
Check Amazon for Diy Solar Light Tubes products.
|
|
|
|
Diy Family Of Yourself As Notebook Cooling
We all know, the general notebook computer components in addition to fever CPU, hard drives and memory, there are display tubes, but the greatest source of heat is still CPU.
Books of the CPU cooling structure increases mainly aluminum heat exhaust fan means, of course, the aluminum plate may contain embedded copper heat pipe heat medium is used to speed up the CPU heat out of the speed of the aluminum The following is also fitted with a small exhaust fan, the aluminum hot air blowing around. In addition, most notebook computers also use shell or aluminum chassis with a keyboard as an auxiliary cooling means.
Notebook cooling control theory like this: through the temperature sensor to monitor CPU temperature, when the temperature reaches a critical value, the cooling fan started, one-way through the thermal conductivity of aluminum cavity, the hot air blowing through the mandatory circulating air, the temperature decreases. When the temperature sensor to monitor the CPU temperature is reduced to the following critical value, the fan will stall as long as the system is running, this cycle has been carried out. According to this theory, if the aluminum thermal efficiency high enough to fully distribute the heat given off CPU, so that the temperature sensor detects the temperature is lower than the threshold value, then the fan will not start. Such as greatly reduced the number of fans start, the noise will be greatly reduced, not only can extend fan life, while also reducing the possibility of system failure.
I have a laptop computer, used for some time, as long as the workload of a large, fans immediately started to run a long time to stop, that the noise really annoying, and decided some good hands-transformation .
First step: the first keyboard with a small screwdriver withstood the top of the clamp, gently off the keyboard.
Then you can see some of the heat the machine, press the CPU on a piece of cast aluminum, curved top with a flattening of copper, aluminum stick embedded in the groove, the end In the CPU at the top of the other end extends to the outermost end vents. According to the author of the test and use, found that manufacturers improve the design of the cooling effect of a very small role, because when the heat when accumulated to a certain extent, the heat pipe with the aluminum temperature is the same, can not form a large temperature difference. Fans will not reduce the number of open.
Second step: cooling board in accordance with the text logo, the fixing screws removed in accordance with the order 1-3-2-4. The aim is to prevent the pressure is not balanced and crushed because the edge CPU.
Heat wave plate carefully, pay attention to unplug the board the power supply fan and the motherboard plug. This time you can see below the cooling plate in contact with the CPU where there is a soft, pewter-like sheet, according to tests, I found that the sheet is redundant, not only can not increase the close contact with nature, also may increase the difficulty of cooling So I get rid of this sheet, coated with graphite powder to gel, reducing the gap may be generated.
About the Author
I am a professional writer from China Crafts Suppliers, which contains a great deal of information about angel Solar Lights , Solar Light Pathway, welcome to visit!
Check Amazon for Diy Solar Light Tubes products.
|
|
ODL EZ10SCANH 10 In. Tubular Skylight with Asphalt Flashing $153.39 ODL, Inc. EZ10SCANH 10" tubular skylight; patented optic technology gathers sunlight - even during low-light hours of the morning, late afternoon, and winter season; reflective light tube optimizes light to control solar heat gain; Energy Star approved; Limited lifetime warranty... |
|
|
Windmax HY400 500 Watt Max 12-Volt 5-Blade Residential Wind Generator Kit $649.00 Advantages of 5-blade wind turbines over 3-blade wind turbines 1) 5-blade wind turbines will greatly improve annual energy production in low wind conditions. For areas with average wind speeds of 11 MPH (5m/s). If you compare annual energy output to conventional 3-blade wind turbine, there is an increase of annual energy output of more than 60%. 2) 5-blade wind turbines will dramatically improve ... |
|
|
SOLAR SKYLITE DIY TUBULAR SKYLIGHT $197.97 This item is Brand New in Factory-Sealed Box w/ 25yrs Warranty. SolarSkyLite is a 10" tubular skylight that will transform any dark space by filling it with beautiful, soft, evenly dispersed natural light. The 10" model illuminates up to 150 sq. ft. which is equal to about 300 watts of incandescent lighting! SolarSkylite has been designed with curb-appeal in mind. The low profile unit blends sea... |
|
|
10 Tubular Skylight Kit $197.50 A low cost do-it-yourself product that provides huge returns. Tubular skylights are a great retro-fit product that allows in free natural daylight into any room or hallway; which reduces the need to turn on electric artificial lighting. CrystaLite, Inc. is located in the greater Seattle / Everett, WA region - it rains a bit there, they know how to provide a water tight product.... |
Solar Perpetual Bedini Motors 2
Thanks for visiting!
Related Posts via Categories
- Solar Light Outdoor
- Solar Light Circuit Kit
- Solar Patio Lights For Awnings
- Solar Light Outdoor Fixtures
- How Solar Yard Lights Work
- Outdoor Solar Lights Advice
- Solar Spot Lights For Sale
- Solar Light Novelties
- Outdoor Solar Lights Changing Colors
- Solar Lights Outdoor Christmas
One Comment
Building your own solar panel and wind turbine can save you hundreds or even thousands of dollars, you just need a good guide, Thanks.